Filtering

Before encoding, ffmpeg can process raw audio and video frames using filters from the libavfilter library. Several chained filters form a filter graph. ffmpeg distinguishes between two types of filtergraphs: simple and complex. Simple filtergraphs Simple filtergraphs are those that have exactly one input and output, both of the same type. In the above diagram they can be represented by simply inserting an additional step between decoding and encoding:
_________ ______________
| | | |
| decoded | | encoded data |
| frames |\ _ | packets |
|_________| \ /||______________|
\ __________ /
simple _\|| | / encoder
filtergraph | filtered |/
| frames |
|__________|
Simple filtergraphs are configured with the per-stream -filter option (with -vf and -af aliases for video and audio respectively). A simple filtergraph for video can look for example like this:
_______ _____________ _______ ________
| | | | | | | |
| input | ---> | deinterlace | ---> | scale | ---> | output |
|_______| |_____________| |_______| |________|
Note that some filters change frame properties but not frame contents. E.g. the "fps" filter in the example above changes number of frames, but does not touch the frame contents. Another example is the "setpts" filter, which only sets timestamps and otherwise passes the frames unchanged. Complex filtergraphs Complex filtergraphs are those which cannot be described as simply a linear processing chain applied to one stream. This is the case, for example, when the graph has more than one input and/or output, or when output stream type is different from input. They can be represented with the following diagram:
_________
| |
| input 0 |\ __________
|_________| \ | |
\ _________ /| output 0 |
\ | | / |__________|
_________ \| complex | /
| | | |/
| input 1 |---->| filter |\
|_________| | | \ __________
/| graph | \ | |
/ | | \| output 1 |
_________ / |_________| |__________|
| | /
| input 2 |/
|_________|
Complex filtergraphs are configured with the -filter_complex option. Note that this option is global, since a complex filtergraph, by its nature, cannot be unambiguously associated with a single stream or file. The -lavfi option is equivalent to -filter_complex. A trivial example of a complex filtergraph is the "overlay" filter, which has two video inputs and one video output, containing one video overlaid on top of the other. Its audio counterpart is the "amix" filter.

Stream copy

Stream copy is a mode selected by supplying the "copy" parameter to the -codec option. It makes ffmpeg omit the decoding and encoding step for the specified stream, so it does only demuxing and muxing. It is useful for changing the container format or modifying container-level metadata. The diagram above will, in this case, simplify to this:
_______ ______________ ________
| | | | | |
| input | demuxer | encoded data | muxer | output |
| file | ---------> | packets | -------> | file |
|_______| |______________| |________|
Since there is no decoding or encoding, it is very fast and there is no quality loss. However, it might not work in some cases because of many factors. Applying filters is obviously also impossible, since filters work on uncompressed data.

Loopback decoders

While decoders are normally associated with demuxer streams, it is also possible to create "loopback" decoders that decode the output from some encoder and allow it to be fed back to complex filtergraphs. This is done with the "-dec" directive, which takes as a parameter the index of the output stream that should be decoded. Every such directive creates a new loopback decoder, indexed with successive integers starting at zero. These indices should then be used to refer to loopback decoders in complex filtergraph link labels, as described in the documentation for -filter_complex. E.g. the following example:
ffmpeg -i INPUT \
-map 0:v:0 -c:v libx264 -crf 45 -f null - \
-dec 0:0 -filter_complex '[0:v][dec:0]hstack[stack]' \
-map '[stack]' -c:v ffv1 OUTPUT
reads an input video and

•

(line 2) encodes it with "libx264" at low quality;

•

(line 3) decodes this encoded stream and places it side by side with the original input video;

•

(line 4) combined video is then losslessly encoded and written into OUTPUT.

Description

The sub-sections that follow describe the various rules that are involved in stream selection. The examples that follow next show how these rules are applied in practice. While every effort is made to accurately reflect the behavior of the program, FFmpeg is under continuous development and the code may have changed since the time of this writing. Automatic stream selection In the absence of any map options for a particular output file, ffmpeg inspects the output format to check which type of streams can be included in it, viz. video, audio and/or subtitles. For each acceptable stream type, ffmpeg will pick one stream, when available, from among all the inputs. It will select that stream based upon the following criteria:

•

for video, it is the stream with the highest resolution,

•

for audio, it is the stream with the most channels,

•

for subtitles, it is the first subtitle stream found but there's a caveat. The output format's default subtitle encoder can be either text-based or image-based, and only a subtitle stream of the same type will be chosen.

In the case where several streams of the same type rate equally, the stream with the lowest index is chosen. Data or attachment streams are not automatically selected and can only be included using "-map". Manual stream selection When "-map" is used, only user-mapped streams are included in that output file, with one possible exception for filtergraph outputs described below. Complex filtergraphs If there are any complex filtergraph output streams with unlabeled pads, they will be added to the first output file. This will lead to a fatal error if the stream type is not supported by the output format. In the absence of the map option, the inclusion of these streams leads to the automatic stream selection of their types being skipped. If map options are present, these filtergraph streams are included in addition to the mapped streams. Complex filtergraph output streams with labeled pads must be mapped once and exactly once. Stream handling Stream handling is independent of stream selection, with an exception for subtitles described below. Stream handling is set via the "-codec" option addressed to streams within a specific output file. In particular, codec options are applied by ffmpeg after the stream selection process and thus do not influence the latter. If no "-codec" option is specified for a stream type, ffmpeg will select the default encoder registered by the output file muxer. An exception exists for subtitles. If a subtitle encoder is specified for an output file, the first subtitle stream found of any type, text or image, will be included. ffmpeg does not validate if the specified encoder can convert the selected stream or if the converted stream is acceptable within the output format. This applies generally as well: when the user sets an encoder manually, the stream selection process cannot check if the encoded stream can be muxed into the output file. If it cannot, ffmpeg will abort and all output files will fail to be processed.

Examples

The following examples illustrate the behavior, quirks and limitations of ffmpeg's stream selection methods. They assume the following three input files.
input file 'A.avi'
stream 0: video 640x360
stream 1: audio 2 channels

input file 'B.mp4'
stream 0: video 1920x1080
stream 1: audio 2 channels
stream 2: subtitles (text)
stream 3: audio 5.1 channels
stream 4: subtitles (text)

input file 'C.mkv'
stream 0: video 1280x720
stream 1: audio 2 channels
stream 2: subtitles (image)
Example: automatic stream selection
ffmpeg -i A.avi -i B.mp4 out1.mkv out2.wav -map 1:a -c:a copy out3.mov
There are three output files specified, and for the first two, no "-map" options are set, so ffmpeg will select streams for these two files automatically. out1.mkv is a Matroska container file and accepts video, audio and subtitle streams, so ffmpeg will try to select one of each type.For video, it will select "stream 0" from B.mp4, which has the highest resolution among all the input video streams.For audio, it will select "stream 3" from B.mp4, since it has the greatest number of channels.For subtitles, it will select "stream 2" from B.mp4, which is the first subtitle stream from among A.avi and B.mp4. out2.wav accepts only audio streams, so only "stream 3" from B.mp4 is selected. For out3.mov, since a "-map" option is set, no automatic stream selection will occur. The "-map 1:a" option will select all audio streams from the second input B.mp4. No other streams will be included in this output file. For the first two outputs, all included streams will be transcoded. The encoders chosen will be the default ones registered by each output format, which may not match the codec of the selected input streams. For the third output, codec option for audio streams has been set to "copy", so no decoding-filtering-encoding operations will occur, or can occur. Packets of selected streams shall be conveyed from the input file and muxed within the output file. Example: automatic subtitles selection
ffmpeg -i C.mkv out1.mkv -c:s dvdsub -an out2.mkv
Although out1.mkv is a Matroska container file which accepts subtitle streams, only a video and audio stream shall be selected. The subtitle stream of C.mkv is image-based and the default subtitle encoder of the Matroska muxer is text-based, so a transcode operation for the subtitles is expected to fail and hence the stream isn't selected. However, in out2.mkv, a subtitle encoder is specified in the command and so, the subtitle stream is selected, in addition to the video stream. The presence of "-an" disables audio stream selection for out2.mkv. Example: unlabeled filtergraph outputs
ffmpeg -i A.avi -i C.mkv -i B.mp4 -filter_complex "overlay" out1.mp4 out2.srt
A filtergraph is setup here using the "-filter_complex" option and consists of a single video filter. The "overlay" filter requires exactly two video inputs, but none are specified, so the first two available video streams are used, those of A.avi and C.mkv. The output pad of the filter has no label and so is sent to the first output file out1.mp4. Due to this, automatic selection of the video stream is skipped, which would have selected the stream in B.mp4. The audio stream with most channels viz. "stream 3" in B.mp4, is chosen automatically. No subtitle stream is chosen however, since the MP4 format has no default subtitle encoder registered, and the user hasn't specified a subtitle encoder. The 2nd output file, out2.srt, only accepts text-based subtitle streams. So, even though the first subtitle stream available belongs to C.mkv, it is image-based and hence skipped. The selected stream, "stream 2" in B.mp4, is the first text-based subtitle stream. Example: labeled filtergraph outputs
ffmpeg -i A.avi -i B.mp4 -i C.mkv -filter_complex "[1:v]hue=s=0[outv];overlay;aresample" \
-map '[outv]' -an out1.mp4 \
out2.mkv \
-map '[outv]' -map 1:a:0 out3.mkv
The above command will fail, as the output pad labelled "[outv]" has been mapped twice. None of the output files shall be processed.
ffmpeg -i A.avi -i B.mp4 -i C.mkv -filter_complex "[1:v]hue=s=0[outv];overlay;aresample" \
-an out1.mp4 \
out2.mkv \
-map 1:a:0 out3.mkv
This command above will also fail as the hue filter output has a label, "[outv]", and hasn't been mapped anywhere. The command should be modified as follows,
ffmpeg -i A.avi -i B.mp4 -i C.mkv -filter_complex "[1:v]hue=s=0,split=2[outv1][outv2];overlay;aresample" \
-map '[outv1]' -an out1.mp4 \
out2.mkv \
-map '[outv2]' -map 1:a:0 out3.mkv
The video stream from B.mp4 is sent to the hue filter, whose output is cloned once using the split filter, and both outputs labelled. Then a copy each is mapped to the first and third output files. The overlay filter, requiring two video inputs, uses the first two unused video streams. Those are the streams from A.avi and C.mkv. The overlay output isn't labelled, so it is sent to the first output file out1.mp4, regardless of the presence of the "-map" option. The aresample filter is sent the first unused audio stream, that of A.avi. Since this filter output is also unlabelled, it too is mapped to the first output file. The presence of "-an" only suppresses automatic or manual stream selection of audio streams, not outputs sent from filtergraphs. Both these mapped streams shall be ordered before the mapped stream in out1.mp4. The video, audio and subtitle streams mapped to "out2.mkv" are entirely determined by automatic stream selection. out3.mkv consists of the cloned video output from the hue filter and the first audio stream from B.mp4.

Stream specifiers

Some options are applied per-stream, e.g. bitrate or codec. Stream specifiers are used to precisely specify which stream(s) a given option belongs to. A stream specifier is a string generally appended to the option name and separated from it by a colon. E.g. "-codec:a:1 ac3" contains the "a:1" stream specifier, which matches the second audio stream. Therefore, it would select the ac3 codec for the second audio stream. A stream specifier can match several streams, so that the option is applied to all of them. E.g. the stream specifier in "-b:a 128k" matches all audio streams. An empty stream specifier matches all streams. For example, "-codec copy" or "-codec: copy" would copy all the streams without reencoding. Possible forms of stream specifiers are:

stream_index

Matches the stream with this index. E.g. "-threads:1 4" would set the thread count for the second stream to 4. If stream_index is used as an additional stream specifier (see below), then it selects stream number stream_index from the matching streams. Stream numbering is based on the order of the streams as detected by libavformat except when a stream group specifier or program ID is also specified. In this case it is based on the ordering of the streams in the group or program.

stream_type[:additional_stream_specifier]

stream_type is one of following: 'v' or 'V' for video, 'a' for audio, 's' for subtitle, 'd' for data, and 't' for attachments. 'v' matches all video streams, 'V' only matches video streams which are not attached pictures, video thumbnails or cover arts. If additional_stream_specifier is used, then it matches streams which both have this type and match the additional_stream_specifier. Otherwise, it matches all streams of the specified type.

g:group_specifier[:additional_stream_specifier]

Matches streams which are in the group with the specifier group_specifier. if additional_stream_specifier is used, then it matches streams which both are part of the group and match the additional_stream_specifier. group_specifier may be one of the following:

p:program_id[:additional_stream_specifier]

Matches streams which are in the program with the id program_id. If additional_stream_specifier is used, then it matches streams which both are part of the program and match the additional_stream_specifier.

#stream_id or i:stream_id

Match the stream by stream id (e.g. PID in MPEG-TS container).

m:key[:value]

Matches streams with the metadata tag key having the specified value. If value is not given, matches streams that contain the given tag with any value.

u

Matches streams with usable configuration, the codec must be defined and the essential information such as video dimension or audio sample rate must be present.

 

Note that in ffmpeg, matching by metadata will only work properly for input files.

Generic options

These options are shared amongst the ff* tools.

-L

Show license.

-h, -?, -help, --help [arg]

Show help. An optional parameter may be specified to print help about a specific item. If no argument is specified, only basic (non advanced) tool options are shown.

 

Possible values of arg are:

-version

Show version.

-buildconf

Show the build configuration, one option per line.

-formats

Show available formats (including devices).

-demuxers

Show available demuxers.

-muxers

Show available muxers.

-devices

Show available devices.

-codecs

Show all codecs known to libavcodec.

 

Note that the term 'codec' is used throughout this documentation as a shortcut for what is more correctly called a media bitstream format.

-decoders

Show available decoders.

-encoders

Show all available encoders.

-bsfs

Show available bitstream filters.

-protocols

Show available protocols.

-filters

Show available libavfilter filters.

-pix_fmts

Show available pixel formats.

-sample_fmts

Show available sample formats.

-layouts

Show channel names and standard channel layouts.

-dispositions

Show stream dispositions.

-colors

Show recognized color names.

-sources device[,opt1=val1[,opt2=val2]...]

Show autodetected sources of the input device. Some devices may provide system-dependent source names that cannot be autodetected. The returned list cannot be assumed to be always complete.

 

ffmpeg -sources pulse,server=192.168.0.4

-sinks device[,opt1=val1[,opt2=val2]...]

Show autodetected sinks of the output device. Some devices may provide system-dependent sink names that cannot be autodetected. The returned list cannot be assumed to be always complete.

 

ffmpeg -sinks pulse,server=192.168.0.4

-loglevel [flags+]loglevel | -v [flags+]loglevel

Set logging level and flags used by the library.

 

The optional flags prefix can consist of the following values:

-report

Dump full command line and log output to a file named " program-YYYYMMDD-HHMMSS.log" in the current directory. This file can be useful for bug reports. It also implies "-loglevel debug".

 

Setting the environment variable FFREPORT to any value has the same effect. If the value is a ':'-separated key=value sequence, these options will affect the report; option values must be escaped if they contain special characters or the options delimiter ':' (see the ``Quoting and escaping'' section in the ffmpeg-utils manual).

 

The following options are recognized:

-hide_banner

Suppress printing banner.

 

All FFmpeg tools will normally show a copyright notice, build options and library versions. This option can be used to suppress printing this information.

-cpuflags flags (global)

Allows setting and clearing cpu flags. This option is intended for testing. Do not use it unless you know what you're doing.

 

ffmpeg -cpuflags -sse+mmx ...
ffmpeg -cpuflags mmx ...
ffmpeg -cpuflags 0 ...

 

Possible flags for this option are:

-cpucount count (global)

Override detection of CPU count. This option is intended for testing. Do not use it unless you know what you're doing.

 

ffmpeg -cpucount 2

-max_alloc bytes

Set the maximum size limit for allocating a block on the heap by ffmpeg's family of malloc functions. Exercise extreme caution when using this option. Don't use if you do not understand the full consequence of doing so. Default is INT_MAX.

AVOptions

These options are provided directly by the libavformat, libavdevice and libavcodec libraries. To see the list of available AVOptions, use the -help option. They are separated into two categories:

generic

These options can be set for any container, codec or device. Generic options are listed under AVFormatContext options for containers/devices and under AVCodecContext options for codecs.

private

These options are specific to the given container, device or codec. Private options are listed under their corresponding containers/devices/codecs.

For example to write an ID3v2.3 header instead of a default ID3v2.4 to an MP3 file, use the id3v2_version private option of the MP3 muxer:
ffmpeg -i input.flac -id3v2_version 3 out.mp3
All codec AVOptions are per-stream, and thus a stream specifier should be attached to them:
ffmpeg -i multichannel.mxf -map 0:v:0 -map 0:a:0 -map 0:a:0 -c:a:0 ac3 -b:a:0 640k -ac:a:1 2 -c:a:1 aac -b:2 128k out.mp4
In the above example, a multichannel audio stream is mapped twice for output. The first instance is encoded with codec ac3 and bitrate 640k. The second instance is downmixed to 2 channels and encoded with codec aac. A bitrate of 128k is specified for it using absolute index of the output stream. Note: the -nooption syntax cannot be used for boolean AVOptions, use -option 0/-option 1. Note: the old undocumented way of specifying per-stream AVOptions by prepending v/a/s to the options name is now obsolete and will be removed soon.

Main options

-f fmt (input/output)

Force input or output file format. The format is normally auto detected for input files and guessed from the file extension for output files, so this option is not needed in most cases.

-i url (input)

input file url

-y (global)

Overwrite output files without asking.

-n (global)

Do not overwrite output files, and exit immediately if a specified output file already exists.

-stream_loop number (input)

Set number of times input stream shall be looped. Loop 0 means no loop, loop -1 means infinite loop.

-recast_media (global)

Allow forcing a decoder of a different media type than the one detected or designated by the demuxer. Useful for decoding media data muxed as data streams.

-c[:stream_specifier] codec (input/output,per-stream)

-codec[:stream_specifier] codec (input/output,per-stream)

Select an encoder (when used before an output file) or a decoder (when used before an input file) for one or more streams. codec is the name of a decoder/encoder or a special value "copy" (output only) to indicate that the stream is not to be re-encoded.

 

For example

 

ffmpeg -i INPUT -map 0 -c:v libx264 -c:a copy OUTPUT

 

encodes all video streams with libx264 and copies all audio streams.

 

For each stream, the last matching "c" option is applied, so

 

ffmpeg -i INPUT -map 0 -c copy -c:v:1 libx264 -c:a:137 libvorbis OUTPUT

 

will copy all the streams except the second video, which will be encoded with libx264, and the 138th audio, which will be encoded with libvorbis.

-t duration (input/output)

When used as an input option (before "-i"), limit the duration of data read from the input file.

 

When used as an output option (before an output url), stop writing the output after its duration reaches duration.

 

duration must be a time duration specification, see the Time duration section in the ffmpeg-utils(1) manual.

 

-to and -t are mutually exclusive and -t has priority.

-to position (input/output)

Stop writing the output or reading the input at position. position must be a time duration specification, see the Time duration section in the ffmpeg-utils(1) manual.

 

-to and -t are mutually exclusive and -t has priority.

-fs limit_size (output)

Set the file size limit, expressed in bytes. No further chunk of bytes is written after the limit is exceeded. The size of the output file is slightly more than the requested file size.

-ss position (input/output)

When used as an input option (before "-i"), seeks in this input file to position. Note that in most formats it is not possible to seek exactly, so ffmpeg will seek to the closest seek point before position. When transcoding and -accurate_seek is enabled (the default), this extra segment between the seek point and position will be decoded and discarded. When doing stream copy or when -noaccurate_seek is used, it will be preserved.

 

When used as an output option (before an output url), decodes but discards input until the timestamps reach position.

 

position must be a time duration specification, see the Time duration section in the ffmpeg-utils(1) manual.

-sseof position (input)

Like the "-ss" option but relative to the "end of file". That is negative values are earlier in the file, 0 is at EOF.

-isync input_index (input)

Assign an input as a sync source.

 

This will take the difference between the start times of the target and reference inputs and offset the timestamps of the target file by that difference. The source timestamps of the two inputs should derive from the same clock source for expected results. If "copyts" is set then "start_at_zero" must also be set. If either of the inputs has no starting timestamp then no sync adjustment is made.

 

Acceptable values are those that refer to a valid ffmpeg input index. If the sync reference is the target index itself or -1, then no adjustment is made to target timestamps. A sync reference may not itself be synced to any other input.

 

Default value is -1.

-itsoffset offset (input)

Set the input time offset.

 

offset must be a time duration specification, see the Time duration section in the ffmpeg-utils(1) manual.

 

The offset is added to the timestamps of the input files. Specifying a positive offset means that the corresponding streams are delayed by the time duration specified in offset.

-itsscale scale (input,per-stream)

Rescale input timestamps. scale should be a floating point number.

-timestamp date (output)

Set the recording timestamp in the container.

 

date must be a date specification, see the Date section in the ffmpeg-utils(1) manual.

-metadata[:metadata_specifier] key=value (output,per-metadata)

Set a metadata key/value pair.

 

An optional metadata_specifier may be given to set metadata on streams, chapters or programs. See "-map_metadata" documentation for details.

 

This option overrides metadata set with "-map_metadata". It is also possible to delete metadata by using an empty value.

 

For example, for setting the title in the output file:

 

ffmpeg -i in.avi -metadata title="my title" out.flv

 

To set the language of the first audio stream:

 

ffmpeg -i INPUT -metadata:s:a:0 language=eng OUTPUT

-disposition[:stream_specifier] value (output,per-stream)

Sets the disposition for a stream.

 

By default, the disposition is copied from the input stream, unless the output stream this option applies to is fed by a complex filtergraph - in that case the disposition is unset by default.

 

value is a sequence of items separated by '+' or '-'. The first item may also be prefixed with '+' or '-', in which case this option modifies the default value. Otherwise (the first item is not prefixed) this options overrides the default value. A '+' prefix adds the given disposition, '-' removes it. It is also possible to clear the disposition by setting it to 0.

 

If no "-disposition" options were specified for an output file, ffmpeg will automatically set the 'default' disposition on the first stream of each type, when there are multiple streams of this type in the output file and no stream of that type is already marked as default.

 

The "-dispositions" option lists the known dispositions.

 

For example, to make the second audio stream the default stream:

 

ffmpeg -i in.mkv -c copy -disposition:a:1 default out.mkv

 

To make the second subtitle stream the default stream and remove the default disposition from the first subtitle stream:

 

ffmpeg -i in.mkv -c copy -disposition:s:0 0 -disposition:s:1 default out.mkv

 

To add an embedded cover/thumbnail:

 

ffmpeg -i in.mp4 -i IMAGE -map 0 -map 1 -c copy -c:v:1 png -disposition:v:1 attached_pic out.mp4

 

Not all muxers support embedded thumbnails, and those who do, only support a few formats, like JPEG or PNG.

-program [title=title:][program_num=program_num:]st=stream[:st=stream...] (output)

Creates a program with the specified title, program_num and adds the specified stream(s) to it.

-stream_group type=type:st=stream[:st=stream][:stg=stream_group][:id=stream_group_id...] (output)

Creates a stream group of the specified type, stream_group_id and adds the specified stream(s) and/or previously defined stream_group(s) to it.

 

type can be one of the following:

-target type (output)

Specify target file type ("vcd", "svcd", "dvd", "dv", "dv50"). type may be prefixed with "pal-", "ntsc-" or "film-" to use the corresponding standard. All the format options (bitrate, codecs, buffer sizes) are then set automatically. You can just type:

 

ffmpeg -i myfile.avi -target vcd /tmp/vcd.mpg

 

Nevertheless you can specify additional options as long as you know they do not conflict with the standard, as in:

 

ffmpeg -i myfile.avi -target vcd -bf 2 /tmp/vcd.mpg

 

The parameters set for each target are as follows.

 

VCD

 

<pal>:
-f vcd -muxrate 1411200 -muxpreload 0.44 -packetsize 2324
-s 352x288 -r 25
-codec:v mpeg1video -g 15 -b:v 1150k -maxrate:v 1150k -minrate:v 1150k -bufsize:v 327680
-ar 44100 -ac 2
-codec:a mp2 -b:a 224k

<ntsc>:
-f vcd -muxrate 1411200 -muxpreload 0.44 -packetsize 2324
-s 352x240 -r 30000/1001
-codec:v mpeg1video -g 18 -b:v 1150k -maxrate:v 1150k -minrate:v 1150k -bufsize:v 327680
-ar 44100 -ac 2
-codec:a mp2 -b:a 224k

<film>:
-f vcd -muxrate 1411200 -muxpreload 0.44 -packetsize 2324
-s 352x240 -r 24000/1001
-codec:v mpeg1video -g 18 -b:v 1150k -maxrate:v 1150k -minrate:v 1150k -bufsize:v 327680
-ar 44100 -ac 2
-codec:a mp2 -b:a 224k

 

SVCD

 

<pal>:
-f svcd -packetsize 2324
-s 480x576 -pix_fmt yuv420p -r 25
-codec:v mpeg2video -g 15 -b:v 2040k -maxrate:v 2516k -minrate:v 0 -bufsize:v 1835008 -scan_offset 1
-ar 44100
-codec:a mp2 -b:a 224k

<ntsc>:
-f svcd -packetsize 2324
-s 480x480 -pix_fmt yuv420p -r 30000/1001
-codec:v mpeg2video -g 18 -b:v 2040k -maxrate:v 2516k -minrate:v 0 -bufsize:v 1835008 -scan_offset 1
-ar 44100
-codec:a mp2 -b:a 224k

<film>:
-f svcd -packetsize 2324
-s 480x480 -pix_fmt yuv420p -r 24000/1001
-codec:v mpeg2video -g 18 -b:v 2040k -maxrate:v 2516k -minrate:v 0 -bufsize:v 1835008 -scan_offset 1
-ar 44100
-codec:a mp2 -b:a 224k

 

DVD

 

<pal>:
-f dvd -muxrate 10080k -packetsize 2048
-s 720x576 -pix_fmt yuv420p -r 25
-codec:v mpeg2video -g 15 -b:v 6000k -maxrate:v 9000k -minrate:v 0 -bufsize:v 1835008
-ar 48000
-codec:a ac3 -b:a 448k

<ntsc>:
-f dvd -muxrate 10080k -packetsize 2048
-s 720x480 -pix_fmt yuv420p -r 30000/1001
-codec:v mpeg2video -g 18 -b:v 6000k -maxrate:v 9000k -minrate:v 0 -bufsize:v 1835008
-ar 48000
-codec:a ac3 -b:a 448k

<film>:
-f dvd -muxrate 10080k -packetsize 2048
-s 720x480 -pix_fmt yuv420p -r 24000/1001
-codec:v mpeg2video -g 18 -b:v 6000k -maxrate:v 9000k -minrate:v 0 -bufsize:v 1835008
-ar 48000
-codec:a ac3 -b:a 448k

 

DV

 

<pal>:
-f dv
-s 720x576 -pix_fmt yuv420p -r 25
-ar 48000 -ac 2

<ntsc>:
-f dv
-s 720x480 -pix_fmt yuv411p -r 30000/1001
-ar 48000 -ac 2

<film>:
-f dv
-s 720x480 -pix_fmt yuv411p -r 24000/1001
-ar 48000 -ac 2

 

The "dv50" target is identical to the "dv" target except that the pixel format set is "yuv422p" for all three standards.

 

Any user-set value for a parameter above will override the target preset value. In that case, the output may not comply with the target standard.

-dn (input/output)

As an input option, blocks all data streams of a file from being filtered or being automatically selected or mapped for any output. See "-discard" option to disable streams individually.

 

As an output option, disables data recording i.e. automatic selection or mapping of any data stream. For full manual control see the "-map" option.

-dframes number (output)

Set the number of data frames to output. This is an obsolete alias for "-frames:d", which you should use instead.

-frames[:stream_specifier] framecount (output,per-stream)

Stop writing to the stream after framecount frames.

-q[:stream_specifier] q (output,per-stream)

-qscale[:stream_specifier] q (output,per-stream)

Use fixed quality scale (VBR). The meaning of q/qscale is codec-dependent. If qscale is used without a stream_specifier then it applies only to the video stream, this is to maintain compatibility with previous behavior and as specifying the same codec specific value to 2 different codecs that is audio and video generally is not what is intended when no stream_specifier is used.

-filter[:stream_specifier] filtergraph (output,per-stream)

Create the filtergraph specified by filtergraph and use it to filter the stream.

 

filtergraph is a description of the filtergraph to apply to the stream, and must have a single input and a single output of the same type of the stream. In the filtergraph, the input is associated to the label "in", and the output to the label "out". See the ffmpeg-filters manual for more information about the filtergraph syntax.

 

See the -filter_complex option if you want to create filtergraphs with multiple inputs and/or outputs.

-reinit_filter[:stream_specifier] integer (input,per-stream)

This boolean option determines if the filtergraph(s) to which this stream is fed gets reinitialized when input frame parameters change mid-stream. This option is enabled by default as most video and all audio filters cannot handle deviation in input frame properties. Upon reinitialization, existing filter state is lost, like e.g. the frame count "n" reference available in some filters. Any frames buffered at time of reinitialization are lost. The properties where a change triggers reinitialization are, for video, frame resolution or pixel format; for audio, sample format, sample rate, channel count or channel layout.

-filter_threads nb_threads (global)

Defines how many threads are used to process a filter pipeline. Each pipeline will produce a thread pool with this many threads available for parallel processing. The default is the number of available CPUs.

-pre[:stream_specifier] preset_name (output,per-stream)

Specify the preset for matching stream(s).

-stats (global)

Print encoding progress/statistics. It is on by default, to explicitly disable it you need to specify "-nostats".

-stats_period time (global)

Set period at which encoding progress/statistics are updated. Default is 0.5 seconds.

-progress url (global)

Send program-friendly progress information to url.

 

Progress information is written periodically and at the end of the encoding process. It is made of " key=value" lines. key consists of only alphanumeric characters. The last key of a sequence of progress information is always "progress".

 

The update period is set using "-stats_period".

-stdin

Enable interaction on standard input. On by default unless standard input is used as an input. To explicitly disable interaction you need to specify "-nostdin".

 

Disabling interaction on standard input is useful, for example, if ffmpeg is in the background process group. Roughly the same result can be achieved with "ffmpeg ... < /dev/null" but it requires a shell.

-debug_ts (global)

Print timestamp/latency information. It is off by default. This option is mostly useful for testing and debugging purposes, and the output format may change from one version to another, so it should not be employed by portable scripts.

 

See also the option "-fdebug ts".

-attach filename (output)

Add an attachment to the output file. This is supported by a few formats like Matroska for e.g. fonts used in rendering subtitles. Attachments are implemented as a specific type of stream, so this option will add a new stream to the file. It is then possible to use per-stream options on this stream in the usual way. Attachment streams created with this option will be created after all the other streams (i.e. those created with "-map" or automatic mappings).

 

Note that for Matroska you also have to set the mimetype metadata tag:

 

ffmpeg -i INPUT -attach DejaVuSans.ttf -metadata:s:2 mimetype=application/x-truetype-font out.mkv

 

(assuming that the attachment stream will be third in the output file).

-dump_attachment[:stream_specifier] filename (input,per-stream)

Extract the matching attachment stream into a file named filename. If filename is empty, then the value of the "filename" metadata tag will be used.

 

E.g. to extract the first attachment to a file named 'out.ttf':

 

ffmpeg -dump_attachment:t:0 out.ttf -i INPUT

 

To extract all attachments to files determined by the "filename" tag:

 

ffmpeg -dump_attachment:t "" -i INPUT

 

Technical note -- attachments are implemented as codec extradata, so this option can actually be used to extract extradata from any stream, not just attachments.

Video Options

-vframes number (output)

Set the number of video frames to output. This is an obsolete alias for "-frames:v", which you should use instead.

-r[:stream_specifier] fps (input/output,per-stream)

Set frame rate (Hz value, fraction or abbreviation).

 

As an input option, ignore any timestamps stored in the file and instead generate timestamps assuming constant frame rate fps. This is not the same as the -framerate option used for some input formats like image2 or v4l2 (it used to be the same in older versions of FFmpeg). If in doubt use -framerate instead of the input option -r.

 

As an output option:

-fpsmax[:stream_specifier] fps (output,per-stream)

Set maximum frame rate (Hz value, fraction or abbreviation).

 

Clamps output frame rate when output framerate is auto-set and is higher than this value. Useful in batch processing or when input framerate is wrongly detected as very high. It cannot be set together with "-r". It is ignored during streamcopy.

-s[:stream_specifier] size (input/output,per-stream)

Set frame size.

 

As an input option, this is a shortcut for the video_size private option, recognized by some demuxers for which the frame size is either not stored in the file or is configurable -- e.g. raw video or video grabbers.

 

As an output option, this inserts the "scale" video filter to the end of the corresponding filtergraph. Please use the "scale" filter directly to insert it at the beginning or some other place.

 

The format is wxh (default - same as source).

-aspect[:stream_specifier] aspect (output,per-stream)

Set the video display aspect ratio specified by aspect.

 

aspect can be a floating point number string, or a string of the form num:den, where num and den are the numerator and denominator of the aspect ratio. For example "4:3", "16:9", "1.3333", and "1.7777" are valid argument values.

 

If used together with -vcodec copy, it will affect the aspect ratio stored at container level, but not the aspect ratio stored in encoded frames, if it exists.

-display_rotation[:stream_specifier] rotation (input,per-stream)

Set video rotation metadata.

 

rotation is a decimal number specifying the amount in degree by which the video should be rotated counter-clockwise before being displayed.

 

This option overrides the rotation/display transform metadata stored in the file, if any. When the video is being transcoded (rather than copied) and "-autorotate" is enabled, the video will be rotated at the filtering stage. Otherwise, the metadata will be written into the output file if the muxer supports it.

 

If the "-display_hflip" and/or "-display_vflip" options are given, they are applied after the rotation specified by this option.

-display_hflip[:stream_specifier] (input,per-stream)

Set whether on display the image should be horizontally flipped.

 

See the "-display_rotation" option for more details.

-display_vflip[:stream_specifier] (input,per-stream)

Set whether on display the image should be vertically flipped.

 

See the "-display_rotation" option for more details.

-vn (input/output)

As an input option, blocks all video streams of a file from being filtered or being automatically selected or mapped for any output. See "-discard" option to disable streams individually.

 

As an output option, disables video recording i.e. automatic selection or mapping of any video stream. For full manual control see the "-map" option.

-vcodec codec (output)

Set the video codec. This is an alias for "-codec:v".

-pass[:stream_specifier] n (output,per-stream)

Select the pass number (1 or 2). It is used to do two-pass video encoding. The statistics of the video are recorded in the first pass into a log file (see also the option -passlogfile), and in the second pass that log file is used to generate the video at the exact requested bitrate. On pass 1, you may just deactivate audio and set output to null, examples for Windows and Unix:

 

ffmpeg -i foo.mov -c:v libxvid -pass 1 -an -f rawvideo -y NUL
ffmpeg -i foo.mov -c:v libxvid -pass 1 -an -f rawvideo -y /dev/null

-passlogfile[:stream_specifier] prefix (output,per-stream)

Set two-pass log file name prefix to prefix, the default file name prefix is ``ffmpeg2pass''. The complete file name will be PREFIX-N.log, where N is a number specific to the output stream

-vf filtergraph (output)

Create the filtergraph specified by filtergraph and use it to filter the stream.

 

This is an alias for "-filter:v", see the -filter option.

-autorotate

Automatically rotate the video according to file metadata. Enabled by default, use -noautorotate to disable it.

-autoscale

Automatically scale the video according to the resolution of first frame. Enabled by default, use -noautoscale to disable it. When autoscale is disabled, all output frames of filter graph might not be in the same resolution and may be inadequate for some encoder/muxer. Therefore, it is not recommended to disable it unless you really know what you are doing. Disable autoscale at your own risk.

Advanced Video options

-pix_fmt[:stream_specifier] format (input/output,per-stream)

Set pixel format. Use "-pix_fmts" to show all the supported pixel formats. If the selected pixel format can not be selected, ffmpeg will print a warning and select the best pixel format supported by the encoder. If pix_fmt is prefixed by a "+", ffmpeg will exit with an error if the requested pixel format can not be selected, and automatic conversions inside filtergraphs are disabled. If pix_fmt is a single "+", ffmpeg selects the same pixel format as the input (or graph output) and automatic conversions are disabled.

-sws_flags flags (input/output)

Set default flags for the libswscale library. These flags are used by automatically inserted "scale" filters and those within simple filtergraphs, if not overridden within the filtergraph definition.

 

See the ffmpeg-scaler manual for a list of scaler options.

-rc_override[:stream_specifier] override (output,per-stream)

Rate control override for specific intervals, formatted as "int,int,int" list separated with slashes. Two first values are the beginning and end frame numbers, last one is quantizer to use if positive, or quality factor if negative.

-vstats

Dump video coding statistics to vstats_HHMMSS.log. See the vstats file format section for the format description.

-vstats_file file

Dump video coding statistics to file. See the vstats file format section for the format description.

-vstats_version file

Specify which version of the vstats format to use. Default is 2. See the vstats file format section for the format description.

-vtag fourcc/tag (output)

Force video tag/fourcc. This is an alias for "-tag:v".

-force_key_frames[:stream_specifier] time[,time...] (output,per-stream)

-force_key_frames[:stream_specifier] expr:expr (output,per-stream)

-force_key_frames[:stream_specifier] source (output,per-stream)

force_key_frames can take arguments of the following form:

-copyinkf[:stream_specifier] (output,per-stream)

When doing stream copy, copy also non-key frames found at the beginning.

-init_hw_device type[=name][:device[,key=value...]]

Initialise a new hardware device of type type called name, using the given device parameters. If no name is specified it will receive a default name of the form " type%d".

 

The meaning of device and the following arguments depends on the device type:

-init_hw_device type[=name]@source

Initialise a new hardware device of type type called name, deriving it from the existing device with the name source.

-init_hw_device list

List all hardware device types supported in this build of ffmpeg.

-filter_hw_device name

Pass the hardware device called name to all filters in any filter graph. This can be used to set the device to upload to with the "hwupload" filter, or the device to map to with the "hwmap" filter. Other filters may also make use of this parameter when they require a hardware device. Note that this is typically only required when the input is not already in hardware frames - when it is, filters will derive the device they require from the context of the frames they receive as input.

 

This is a global setting, so all filters will receive the same device.

-hwaccel[:stream_specifier] hwaccel (input,per-stream)

Use hardware acceleration to decode the matching stream(s). The allowed values of hwaccel are:

-hwaccel_device[:stream_specifier] hwaccel_device (input,per-stream)

Select a device to use for hardware acceleration.

 

This option only makes sense when the -hwaccel option is also specified. It can either refer to an existing device created with -init_hw_device by name, or it can create a new device as if -init_hw_device type:hwaccel_device were called immediately before.

-hwaccels

List all hardware acceleration components enabled in this build of ffmpeg. Actual runtime availability depends on the hardware and its suitable driver being installed.

-fix_sub_duration_heartbeat[:stream_specifier]

Set a specific output video stream as the heartbeat stream according to which to split and push through currently in-progress subtitle upon receipt of a random access packet.

 

This lowers the latency of subtitles for which the end packet or the following subtitle has not yet been received. As a drawback, this will most likely lead to duplication of subtitle events in order to cover the full duration, so when dealing with use cases where latency of when the subtitle event is passed on to output is not relevant this option should not be utilized.

 

Requires -fix_sub_duration to be set for the relevant input subtitle stream for this to have any effect, as well as for the input subtitle stream having to be directly mapped to the same output in which the heartbeat stream resides.

Audio Options

-aframes number (output)

Set the number of audio frames to output. This is an obsolete alias for "-frames:a", which you should use instead.

-ar[:stream_specifier] freq (input/output,per-stream)

Set the audio sampling frequency. For output streams it is set by default to the frequency of the corresponding input stream. For input streams this option only makes sense for audio grabbing devices and raw demuxers and is mapped to the corresponding demuxer options.

-aq q (output)

Set the audio quality (codec-specific, VBR). This is an alias for -q:a.

-ac[:stream_specifier] channels (input/output,per-stream)

Set the number of audio channels. For output streams it is set by default to the number of input audio channels. For input streams this option only makes sense for audio grabbing devices and raw demuxers and is mapped to the corresponding demuxer options.

-an (input/output)

As an input option, blocks all audio streams of a file from being filtered or being automatically selected or mapped for any output. See "-discard" option to disable streams individually.

 

As an output option, disables audio recording i.e. automatic selection or mapping of any audio stream. For full manual control see the "-map" option.

-acodec codec (input/output)

Set the audio codec. This is an alias for "-codec:a".

-sample_fmt[:stream_specifier] sample_fmt (output,per-stream)

Set the audio sample format. Use "-sample_fmts" to get a list of supported sample formats.

-af filtergraph (output)

Create the filtergraph specified by filtergraph and use it to filter the stream.

 

This is an alias for "-filter:a", see the -filter option.

Advanced Audio options

-atag fourcc/tag (output)

Force audio tag/fourcc. This is an alias for "-tag:a".

-guess_layout_max channels (input,per-stream)

If some input channel layout is not known, try to guess only if it corresponds to at most the specified number of channels. For example, 2 tells to ffmpeg to recognize 1 channel as mono and 2 channels as stereo but not 6 channels as 5.1. The default is to always try to guess. Use 0 to disable all guessing.

Subtitle options

-scodec codec (input/output)

Set the subtitle codec. This is an alias for "-codec:s".

-sn (input/output)

As an input option, blocks all subtitle streams of a file from being filtered or being automatically selected or mapped for any output. See "-discard" option to disable streams individually.

 

As an output option, disables subtitle recording i.e. automatic selection or mapping of any subtitle stream. For full manual control see the "-map" option.

Advanced Subtitle options

-fix_sub_duration

Fix subtitles durations. For each subtitle, wait for the next packet in the same stream and adjust the duration of the first to avoid overlap. This is necessary with some subtitles codecs, especially DVB subtitles, because the duration in the original packet is only a rough estimate and the end is actually marked by an empty subtitle frame. Failing to use this option when necessary can result in exaggerated durations or muxing failures due to non-monotonic timestamps.

 

Note that this option will delay the output of all data until the next subtitle packet is decoded: it may increase memory consumption and latency a lot.

-canvas_size size

Set the size of the canvas used to render subtitles.

Advanced options

-map [-]input_file_id[:stream_specifier][?] | [linklabel] (output)

Create one or more streams in the output file. This option has two forms for specifying the data source(s): the first selects one or more streams from some input file (specified with "-i"), the second takes an output from some complex filtergraph (specified with "-filter_complex").

 

In the first form, an output stream is created for every stream from the input file with the index input_file_id. If stream_specifier is given, only those streams that match the specifier are used (see the Stream specifiers section for the stream_specifier syntax).

 

A "-" character before the stream identifier creates a "negative" mapping. It disables matching streams from already created mappings.

 

A trailing "?" after the stream index will allow the map to be optional: if the map matches no streams the map will be ignored instead of failing. Note the map will still fail if an invalid input file index is used; such as if the map refers to a non-existent input.

 

An alternative [linklabel] form will map outputs from complex filter graphs (see the -filter_complex option) to the output file. linklabel must correspond to a defined output link label in the graph.

 

This option may be specified multiple times, each adding more streams to the output file. Any given input stream may also be mapped any number of times as a source for different output streams, e.g. in order to use different encoding options and/or filters. The streams are created in the output in the same order in which the "-map" options are given on the commandline.

 

Using this option disables the default mappings for this output file.

 

Examples:

-ignore_unknown

Ignore input streams with unknown type instead of failing if copying such streams is attempted.

-copy_unknown

Allow input streams with unknown type to be copied instead of failing if copying such streams is attempted.

-map_metadata[:metadata_spec_out] infile[:metadata_spec_in] (output,per-metadata)

Set metadata information of the next output file from infile. Note that those are file indices (zero-based), not filenames. Optional metadata_spec_in/out parameters specify, which metadata to copy. A metadata specifier can have the following forms:

-map_chapters input_file_index (output)

Copy chapters from input file with index input_file_index to the next output file. If no chapter mapping is specified, then chapters are copied from the first input file with at least one chapter. Use a negative file index to disable any chapter copying.

-benchmark (global)

Show benchmarking information at the end of an encode. Shows real, system and user time used and maximum memory consumption. Maximum memory consumption is not supported on all systems, it will usually display as 0 if not supported.

-benchmark_all (global)

Show benchmarking information during the encode. Shows real, system and user time used in various steps (audio/video encode/decode).

-timelimit duration (global)

Exit after ffmpeg has been running for duration seconds in CPU user time.

-dump (global)

Dump each input packet to stderr.

-hex (global)

When dumping packets, also dump the payload.

-readrate speed (input)

Limit input read speed.

 

Its value is a floating-point positive number which represents the maximum duration of media, in seconds, that should be ingested in one second of wallclock time. Default value is zero and represents no imposed limitation on speed of ingestion. Value 1 represents real-time speed and is equivalent to "-re".

 

Mainly used to simulate a capture device or live input stream (e.g. when reading from a file). Should not be used with a low value when input is an actual capture device or live stream as it may cause packet loss.

 

It is useful for when flow speed of output packets is important, such as live streaming.

-re (input)

Read input at native frame rate. This is equivalent to setting "-readrate 1".

-readrate_initial_burst seconds

Set an initial read burst time, in seconds, after which -re/-readrate will be enforced.

-vsync parameter (global)

-fps_mode[:stream_specifier] parameter (output,per-stream)

Set video sync method / framerate mode. vsync is applied to all output video streams but can be overridden for a stream by setting fps_mode. vsync is deprecated and will be removed in the future.

 

For compatibility reasons some of the values for vsync can be specified as numbers (shown in parentheses in the following table).

-frame_drop_threshold parameter

Frame drop threshold, which specifies how much behind video frames can be before they are dropped. In frame rate units, so 1.0 is one frame. The default is -1.1. One possible usecase is to avoid framedrops in case of noisy timestamps or to increase frame drop precision in case of exact timestamps.

-apad parameters (output,per-stream)

Pad the output audio stream(s). This is the same as applying "-af apad". Argument is a string of filter parameters composed the same as with the "apad" filter. "-shortest" must be set for this output for the option to take effect.

-copyts

Do not process input timestamps, but keep their values without trying to sanitize them. In particular, do not remove the initial start time offset value.

 

Note that, depending on the vsync option or on specific muxer processing (e.g. in case the format option avoid_negative_ts is enabled) the output timestamps may mismatch with the input timestamps even when this option is selected.

-start_at_zero

When used with copyts, shift input timestamps so they start at zero.

 

This means that using e.g. "-ss 50" will make output timestamps start at 50 seconds, regardless of what timestamp the input file started at.

-copytb mode

Specify how to set the encoder timebase when stream copying. mode is an integer numeric value, and can assume one of the following values:

-enc_time_base[:stream_specifier] timebase (output,per-stream)

Set the encoder timebase. timebase can assume one of the following values:

-bitexact (input/output)

Enable bitexact mode for (de)muxer and (de/en)coder

-shortest (output)

Finish encoding when the shortest output stream ends.

 

Note that this option may require buffering frames, which introduces extra latency. The maximum amount of this latency may be controlled with the "-shortest_buf_duration" option.

-shortest_buf_duration duration (output)

The "-shortest" option may require buffering potentially large amounts of data when at least one of the streams is "sparse" (i.e. has large gaps between frames – this is typically the case for subtitles).

 

This option controls the maximum duration of buffered frames in seconds. Larger values may allow the "-shortest" option to produce more accurate results, but increase memory use and latency.

 

The default value is 10 seconds.

-dts_delta_threshold threshold

Timestamp discontinuity delta threshold, expressed as a decimal number of seconds.

 

The timestamp discontinuity correction enabled by this option is only applied to input formats accepting timestamp discontinuity (for which the "AVFMT_TS_DISCONT" flag is enabled), e.g. MPEG-TS and HLS, and is automatically disabled when employing the "-copyts" option (unless wrapping is detected).

 

If a timestamp discontinuity is detected whose absolute value is greater than threshold, ffmpeg will remove the discontinuity by decreasing/increasing the current DTS and PTS by the corresponding delta value.

 

The default value is 10.

-dts_error_threshold threshold

Timestamp error delta threshold, expressed as a decimal number of seconds.

 

The timestamp correction enabled by this option is only applied to input formats not accepting timestamp discontinuity (for which the "AVFMT_TS_DISCONT" flag is not enabled).

 

If a timestamp discontinuity is detected whose absolute value is greater than threshold, ffmpeg will drop the PTS/DTS timestamp value.

 

The default value is "3600*30" (30 hours), which is arbitrarily picked and quite conservative.

-muxdelay seconds (output)

Set the maximum demux-decode delay.

-muxpreload seconds (output)

Set the initial demux-decode delay.

-streamid output-stream-index:new-value (output)

Assign a new stream-id value to an output stream. This option should be specified prior to the output filename to which it applies. For the situation where multiple output files exist, a streamid may be reassigned to a different value.

 

For example, to set the stream 0 PID to 33 and the stream 1 PID to 36 for an output mpegts file:

 

ffmpeg -i inurl -streamid 0:33 -streamid 1:36 out.ts

-bsf[:stream_specifier] bitstream_filters (input/output,per-stream)

Apply bitstream filters to matching streams. The filters are applied to each packet as it is received from the demuxer (when used as an input option) or before it is sent to the muxer (when used as an output option).

 

bitstream_filters is a comma-separated list of bitstream filter specifications, each of the form

 

<filter>[=<optname0>=<optval0>:<optname1>=<optval1>:...]

 

Any of the ',=:' characters that are to be a part of an option value need to be escaped with a backslash.

 

Use the "-bsfs" option to get the list of bitstream filters.

 

E.g.

 

ffmpeg -bsf:v h264_mp4toannexb -i h264.mp4 -c:v copy -an out.h264

 

applies the "h264_mp4toannexb" bitstream filter (which converts MP4-encapsulated H.264 stream to Annex B) to the input video stream.

 

On the other hand,

 

ffmpeg -i file.mov -an -vn -bsf:s mov2textsub -c:s copy -f rawvideo sub.txt

 

applies the "mov2textsub" bitstream filter (which extracts text from MOV subtitles) to the output subtitle stream. Note, however, that since both examples use "-c copy", it matters little whether the filters are applied on input or output - that would change if transcoding was happening.

-tag[:stream_specifier] codec_tag (input/output,per-stream)

Force a tag/fourcc for matching streams.

-timecode hh:mm:ssSEPff

Specify Timecode for writing. SEP is ':' for non drop timecode and ';' (or '.') for drop.

 

ffmpeg -i input.mpg -timecode 01:02:03.04 -r 30000/1001 -s ntsc output.mpg

-filter_complex filtergraph (global)

Define a complex filtergraph, i.e. one with arbitrary number of inputs and/or outputs. For simple graphs -- those with one input and one output of the same type -- see the -filter options. filtergraph is a description of the filtergraph, as described in the ``Filtergraph syntax'' section of the ffmpeg-filters manual.

 

Input link labels must refer to either input streams or loopback decoders. For input streams, use the "[file_index:stream_specifier]" syntax (i.e. the same as -map uses). If stream_specifier matches multiple streams, the first one will be used.

 

For decoders, the link label must be [dec:dec_idx], where dec_idx is the index of the loopback decoder to be connected to given input.

 

An unlabeled input will be connected to the first unused input stream of the matching type.

 

Output link labels are referred to with -map. Unlabeled outputs are added to the first output file.

 

Note that with this option it is possible to use only lavfi sources without normal input files.

 

For example, to overlay an image over video

 

ffmpeg -i video.mkv -i image.png -filter_complex '[0:v][1:v]overlay[out]' -map
'[out]' out.mkv

 

Here "[0:v]" refers to the first video stream in the first input file, which is linked to the first (main) input of the overlay filter. Similarly the first video stream in the second input is linked to the second (overlay) input of overlay.

 

Assuming there is only one video stream in each input file, we can omit input labels, so the above is equivalent to

 

ffmpeg -i video.mkv -i image.png -filter_complex 'overlay[out]' -map
'[out]' out.mkv

 

Furthermore we can omit the output label and the single output from the filter graph will be added to the output file automatically, so we can simply write

 

ffmpeg -i video.mkv -i image.png -filter_complex 'overlay' out.mkv

 

As a special exception, you can use a bitmap subtitle stream as input: it will be converted into a video with the same size as the largest video in the file, or 720x576 if no video is present. Note that this is an experimental and temporary solution. It will be removed once libavfilter has proper support for subtitles.

 

For example, to hardcode subtitles on top of a DVB-T recording stored in MPEG-TS format, delaying the subtitles by 1 second:

 

ffmpeg -i input.ts -filter_complex \
'[#0x2ef] setpts=PTS+1/TB [sub] ; [#0x2d0] [sub] overlay' \
-sn -map '#0x2dc' output.mkv

 

(0x2d0, 0x2dc and 0x2ef are the MPEG-TS PIDs of respectively the video, audio and subtitles streams; 0:0, 0:3 and 0:7 would have worked too)

 

To generate 5 seconds of pure red video using lavfi "color" source:

 

ffmpeg -filter_complex 'color=c=red' -t 5 out.mkv

-filter_complex_threads nb_threads (global)

Defines how many threads are used to process a filter_complex graph. Similar to filter_threads but used for "-filter_complex" graphs only. The default is the number of available CPUs.

-lavfi filtergraph (global)

Define a complex filtergraph, i.e. one with arbitrary number of inputs and/or outputs. Equivalent to -filter_complex.

-accurate_seek (input)

This option enables or disables accurate seeking in input files with the -ss option. It is enabled by default, so seeking is accurate when transcoding. Use -noaccurate_seek to disable it, which may be useful e.g. when copying some streams and transcoding the others.

-seek_timestamp (input)

This option enables or disables seeking by timestamp in input files with the -ss option. It is disabled by default. If enabled, the argument to the -ss option is considered an actual timestamp, and is not offset by the start time of the file. This matters only for files which do not start from timestamp 0, such as transport streams.

-thread_queue_size size (input/output)

For input, this option sets the maximum number of queued packets when reading from the file or device. With low latency / high rate live streams, packets may be discarded if they are not read in a timely manner; setting this value can force ffmpeg to use a separate input thread and read packets as soon as they arrive. By default ffmpeg only does this if multiple inputs are specified.

 

For output, this option specified the maximum number of packets that may be queued to each muxing thread.

-sdp_file file (global)

Print sdp information for an output stream to file. This allows dumping sdp information when at least one output isn't an rtp stream. (Requires at least one of the output formats to be rtp).

-discard (input)

Allows discarding specific streams or frames from streams. Any input stream can be fully discarded, using value "all" whereas selective discarding of frames from a stream occurs at the demuxer and is not supported by all demuxers.

-abort_on flags (global)

Stop and abort on various conditions. The following flags are available:

-max_error_rate (global)

Set fraction of decoding frame failures across all inputs which when crossed ffmpeg will return exit code 69. Crossing this threshold does not terminate processing. Range is a floating-point number between 0 to 1. Default is 2/3.

-xerror (global)

Stop and exit on error

-max_muxing_queue_size packets (output,per-stream)

When transcoding audio and/or video streams, ffmpeg will not begin writing into the output until it has one packet for each such stream. While waiting for that to happen, packets for other streams are buffered. This option sets the size of this buffer, in packets, for the matching output stream.

 

The default value of this option should be high enough for most uses, so only touch this option if you are sure that you need it.

-muxing_queue_data_threshold bytes (output,per-stream)

This is a minimum threshold until which the muxing queue size is not taken into account. Defaults to 50 megabytes per stream, and is based on the overall size of packets passed to the muxer.

-auto_conversion_filters (global)

Enable automatically inserting format conversion filters in all filter graphs, including those defined by -vf, -af, -filter_complex and -lavfi. If filter format negotiation requires a conversion, the initialization of the filters will fail. Conversions can still be performed by inserting the relevant conversion filter (scale, aresample) in the graph. On by default, to explicitly disable it you need to specify "-noauto_conversion_filters".

-bits_per_raw_sample[:stream_specifier] value (output,per-stream)

Declare the number of bits per raw sample in the given output stream to be value. Note that this option sets the information provided to the encoder/muxer, it does not change the stream to conform to this value. Setting values that do not match the stream properties may result in encoding failures or invalid output files.

-stats_enc_pre[:stream_specifier] path (output,per-stream)

-stats_enc_post[:stream_specifier] path (output,per-stream)

-stats_mux_pre[:stream_specifier] path (output,per-stream)

Write per-frame encoding information about the matching streams into the file given by path.

 

-stats_enc_pre writes information about raw video or audio frames right before they are sent for encoding, while -stats_enc_post writes information about encoded packets as they are received from the encoder. -stats_mux_pre writes information about packets just as they are about to be sent to the muxer. Every frame or packet produces one line in the specified file. The format of this line is controlled by -stats_enc_pre_fmt / -stats_enc_post_fmt / -stats_mux_pre_fmt.

 

When stats for multiple streams are written into a single file, the lines corresponding to different streams will be interleaved. The precise order of this interleaving is not specified and not guaranteed to remain stable between different invocations of the program, even with the same options.

-stats_enc_pre_fmt[:stream_specifier] format_spec (output,per-stream)

-stats_enc_post_fmt[:stream_specifier] format_spec (output,per-stream)

-stats_mux_pre_fmt[:stream_specifier] format_spec (output,per-stream)

Specify the format for the lines written with -stats_enc_pre / -stats_enc_post / -stats_mux_pre.

 

format_spec is a string that may contain directives of the form {fmt}. format_spec is backslash-escaped --- use \{, \}, and \\ to write a literal {, }, or \, respectively, into the output.

 

The directives given with fmt may be one of the following:

Preset files

A preset file contains a sequence of option=value pairs, one for each line, specifying a sequence of options which would be awkward to specify on the command line. Lines starting with the hash ('#') character are ignored and are used to provide comments. Check the presets directory in the FFmpeg source tree for examples. There are two types of preset files: ffpreset and avpreset files. ffpreset files ffpreset files are specified with the "vpre", "apre", "spre", and "fpre" options. The "fpre" option takes the filename of the preset instead of a preset name as input and can be used for any kind of codec. For the "vpre", "apre", and "spre" options, the options specified in a preset file are applied to the currently selected codec of the same type as the preset option. The argument passed to the "vpre", "apre", and "spre" preset options identifies the preset file to use according to the following rules: First ffmpeg searches for a file named arg.ffpreset in the directories $FFMPEG_DATADIR (if set), and $HOME/.ffmpeg, and in the datadir defined at configuration time (usually PREFIX/share/ffmpeg) or in a ffpresets folder along the executable on win32, in that order. For example, if the argument is "libvpx-1080p", it will search for the file libvpx-1080p.ffpreset. If no such file is found, then ffmpeg will search for a file named codec_name-arg.ffpreset in the above-mentioned directories, where codec_name is the name of the codec to which the preset file options will be applied. For example, if you select the video codec with "-vcodec libvpx" and use "-vpre 1080p", then it will search for the file libvpx-1080p.ffpreset. avpreset files avpreset files are specified with the "pre" option. They work similar to ffpreset files, but they only allow encoder- specific options. Therefore, an option=value pair specifying an encoder cannot be used. When the "pre" option is specified, ffmpeg will look for files with the suffix .avpreset in the directories $AVCONV_DATADIR (if set), and $HOME/.avconv, and in the datadir defined at configuration time (usually PREFIX/share/ffmpeg), in that order. First ffmpeg searches for a file named codec_name-arg.avpreset in the above-mentioned directories, where codec_name is the name of the codec to which the preset file options will be applied. For example, if you select the video codec with "-vcodec libvpx" and use "-pre 1080p", then it will search for the file libvpx-1080p.avpreset. If no such file is found, then ffmpeg will search for a file named arg.avpreset in the same directories.

vstats file format

The "-vstats" and "-vstats_file" options enable generation of a file containing statistics about the generated video outputs. The "-vstats_version" option controls the format version of the generated file. With version 1 the format is:
frame= <FRAME> q= <FRAME_QUALITY> PSNR= <PSNR> f_size= <FRAME_SIZE> s_size= <STREAM_SIZE>kB time= <TIMESTAMP> br= <BITRATE>kbits/s avg_br= <AVERAGE_BITRATE>kbits/s
With version 2 the format is:
out= <OUT_FILE_INDEX> st= <OUT_FILE_STREAM_INDEX> frame= <FRAME_NUMBER> q= <FRAME_QUALITY>f PSNR= <PSNR> f_size= <FRAME_SIZE> s_size= <STREAM_SIZE>kB time= <TIMESTAMP> br= <BITRATE>kbits/s avg_br= <AVERAGE_BITRATE>kbits/s
The value corresponding to each key is described below:

avg_br

average bitrate expressed in Kbits/s

br

bitrate expressed in Kbits/s

frame

number of encoded frame

out

out file index

PSNR

Peak Signal to Noise Ratio

q

quality of the frame

f_size

encoded packet size expressed as number of bytes

s_size

stream size expressed in KiB

st

out file stream index

time

time of the packet

type

picture type

See also the -stats_enc options for an alternative way to show encoding statistics.

Video and Audio grabbing

If you specify the input format and device then ffmpeg can grab video and audio directly.
ffmpeg -f oss -i /dev/dsp -f video4linux2 -i /dev/video0 /tmp/out.mpg
Or with an ALSA audio source (mono input, card id 1) instead of OSS:
ffmpeg -f alsa -ac 1 -i hw:1 -f video4linux2 -i /dev/video0 /tmp/out.mpg
Note that you must activate the right video source and channel before launching ffmpeg with any TV viewer such as < http://linux.bytesex.org/xawtv/> by Gerd Knorr. You also have to set the audio recording levels correctly with a standard mixer.

X11 grabbing

Grab the X11 display with ffmpeg via
ffmpeg -f x11grab -video_size cif -framerate 25 -i :0.0 /tmp/out.mpg
0.0 is display.screen number of your X11 server, same as the DISPLAY environment variable.
ffmpeg -f x11grab -video_size cif -framerate 25 -i :0.0+10,20 /tmp/out.mpg
0.0 is display.screen number of your X11 server, same as the DISPLAY environment variable. 10 is the x-offset and 20 the y-offset for the grabbing.

Video and Audio file format conversion

Any supported file format and protocol can serve as input to ffmpeg: Examples:

•

You can use YUV files as input:

 

ffmpeg -i /tmp/test%d.Y /tmp/out.mpg

 

It will use the files:

 

/tmp/test0.Y, /tmp/test0.U, /tmp/test0.V,
/tmp/test1.Y, /tmp/test1.U, /tmp/test1.V, etc...

 

The Y files use twice the resolution of the U and V files. They are raw files, without header. They can be generated by all decent video decoders. You must specify the size of the image with the -s option if ffmpeg cannot guess it.

•

You can input from a raw YUV420P file:

 

ffmpeg -i /tmp/test.yuv /tmp/out.avi

 

test.yuv is a file containing raw YUV planar data. Each frame is composed of the Y plane followed by the U and V planes at half vertical and horizontal resolution.

•

You can output to a raw YUV420P file:

 

ffmpeg -i mydivx.avi hugefile.yuv

•

You can set several input files and output files:

 

ffmpeg -i /tmp/a.wav -s 640x480 -i /tmp/a.yuv /tmp/a.mpg

 

Converts the audio file a.wav and the raw YUV video file a.yuv to MPEG file a.mpg.

•

You can also do audio and video conversions at the same time:

 

ffmpeg -i /tmp/a.wav -ar 22050 /tmp/a.mp2

 

Converts a.wav to MPEG audio at 22050 Hz sample rate.

•

You can encode to several formats at the same time and define a mapping from input stream to output streams:

 

ffmpeg -i /tmp/a.wav -map 0:a -b:a 64k /tmp/a.mp2 -map 0:a -b:a 128k /tmp/b.mp2

 

Converts a.wav to a.mp2 at 64 kbits and to b.mp2 at 128 kbits. '-map file:index' specifies which input stream is used for each output stream, in the order of the definition of output streams.

•

You can transcode decrypted VOBs:

 

ffmpeg -i snatch_1.vob -f avi -c:v mpeg4 -b:v 800k -g 300 -bf 2 -c:a libmp3lame -b:a 128k snatch.avi

 

This is a typical DVD ripping example; the input is a VOB file, the output an AVI file with MPEG-4 video and MP3 audio. Note that in this command we use B-frames so the MPEG-4 stream is DivX5 compatible, and GOP size is 300 which means one intra frame every 10 seconds for 29.97fps input video. Furthermore, the audio stream is MP3-encoded so you need to enable LAME support by passing "--enable-libmp3lame" to configure. The mapping is particularly useful for DVD transcoding to get the desired audio language.

 

NOTE: To see the supported input formats, use "ffmpeg -demuxers".

•

You can extract images from a video, or create a video from many images:

 

For extracting images from a video:

 

ffmpeg -i foo.avi -r 1 -s WxH -f image2 foo-%03d.jpeg

 

This will extract one video frame per second from the video and will output them in files named foo-001.jpeg, foo-002.jpeg, etc. Images will be rescaled to fit the new WxH values.

 

If you want to extract just a limited number of frames, you can use the above command in combination with the "-frames:v" or "-t" option, or in combination with -ss to start extracting from a certain point in time.

 

For creating a video from many images:

 

ffmpeg -f image2 -framerate 12 -i foo-%03d.jpeg -s WxH foo.avi

 

The syntax "foo-%03d.jpeg" specifies to use a decimal number composed of three digits padded with zeroes to express the sequence number. It is the same syntax supported by the C printf function, but only formats accepting a normal integer are suitable.

 

When importing an image sequence, -i also supports expanding shell-like wildcard patterns (globbing) internally, by selecting the image2-specific "-pattern_type glob" option.

 

For example, for creating a video from filenames matching the glob pattern "foo-*.jpeg":

 

ffmpeg -f image2 -pattern_type glob -framerate 12 -i 'foo-*.jpeg' -s WxH foo.avi

•

You can put many streams of the same type in the output:

 

ffmpeg -i test1.avi -i test2.avi -map 1:1 -map 1:0 -map 0:1 -map 0:0 -c copy -y test12.nut

 

The resulting output file test12.nut will contain the first four streams from the input files in reverse order.

•

To force CBR video output:

 

ffmpeg -i myfile.avi -b 4000k -minrate 4000k -maxrate 4000k -bufsize 1835k out.m2v

•

The four options lmin, lmax, mblmin and mblmax use 'lambda' units, but you may use the QP2LAMBDA constant to easily convert from 'q' units:

 

ffmpeg -i src.ext -lmax 21*QP2LAMBDA dst.ext